Test Settings

After creating a new Test, it will be necessary in most cases to set various properties for the assessment and its individual parts. There are four levels in which properties may be assigned: the Test level, the Test part level, the Section level, and the Item level. These properties will appear in the Properties Panel on the right when you click on the appropriate properties icon (depicted as three interacting gears).

The Test level properties icon can be found in the Test bar at the top of the canvas. Test part level properties icons can be found in each grey Test part bar, while Section level properties icons will be found on the same line as the section label. Item level properties icons can be found next to the item’s label.

Test Settings
Test Settings

1. Click on the Test level properties icon.

This brings up four panels on the right: general properties, Time Limits, Scoring and Outcome Declarations.

In the general properties, the Identifier box should normally be left as it is, though it is editable. However, the test Title can be renamed to make it easier for the Test-taker to identify.

In the Time Limits you can set a time limit for tests at either the item level or the test level. To limit the amount of time the test-taker has to complete the test, enter the maximum duration (in hours, minutes, and seconds). If late submissions are to be accepted, check the Late submission allowed box. If the duration is to be strictly enforced (i.e. no late submissions are allowed), leave this unchecked.

See the section on Scoring Tests for more information on Scoring and Outcome Declarations.

Test Settings
Test Settings

2. Click on the Test-part level properties icon.

This brings up three panels on the right: a general properties panel, an Item Session Control panel, and a Time Limits panel.

In the general properties panel, the Identifier box should be renamed as appropriate.

The Navigation box, or how the test-taker is allowed to answer questions, should be selected as either linear (first question first, second question second, etc.) or non-linear (can be answered in any order).

Select the Submission mode as either individual (submitted response by response) or simultaneous (submitted on completion of the test-part) by clicking in the appropriate box.

Settings for Test Parts
Settings for Test Parts

In the Item Session Control Panel, set the following four properties:

Set Max Attempts to the number of attempts the test-taker may have (the default setting 0 permits an unlimited number of attempts).

Check the Show Feedback box if the test-taker should see the modal feedback (instant feedback) after completing this test-part.

Check the Allow Comment box if the test-taker may provide explanations for responses, or leave feedback for the test.

An Allow Skipping box will be visible if this has been configured on the server. If this box is checked, a Skip button will appear during the test for the questions in this test-part. The test-taker can choose to pass on any of the questions by selecting this button. In other words, if the test-taker selects the Skip button, they will be taken to the next question in the test and any answer given to the question on the screen will be disregarded, and therefore not submitted for processing.

Note: In contrast, if the test-taker selects the Next button, they will also be taken to the next question, but in this case any answer given will be submitted for processing.

Check the Validate responses box if only responses which are valid should be accepted. If this box is checked, constraints governing the test-taker’s response (such as if the minimum and maximum choices specified for that question have been given) will be checked before the test-taker can proceed to the next question.

Item Session Control
Item Session Control

The time limits section is similar in nature to the time limits section for the test level properties, except that the settings apply to the current test-part only.

Time Limits for Test Parts
Time Limits for Test Parts

3. Click on the Section level properties icon.

This brings up eight panels on the right: general properties, Test Navigation, Navigation Warnings, Test-taker Tools, Selection properties, Ordering, Item Session Control, and Time Limits. The last two panels are the same as the last two in the test part properties, while the first six panels differ from previous levels.

Note: In the Ignite/Premium Edition of TAO, tests can be configured at section level to provide test-takers with the option of hearing the test content as well as reading it. This text-to-speech functionality allows the test-taker to hear the test questions, or parts of them, read aloud. See the chapter Test-taker Tool Configuration for more information.

The general properties include an identifier and title: the default name in the Identifier box should generally be maintained, while the Title can be changed to suit the test. In general, the Visible box should be checked (or else the test-taker is unable to see the section), and the Keep Together box should also be checked if it is important that the entire section be completed before moving onto the next section. Categories act as tag references, which may be displayed to the test-taker.

Settings for Test Sections
Settings for Test Sections

In the Test Navigation panel, if Enable Review Screen is checked, a review panel will appear on the left when a test-taker is taking the test.

How the Review Panel appears to the test-taker
How the Review Panel appears to the test-taker

The Review Panel in the example above shows a non-linear test. See the chapter on the Review Panel for more information on how it can be used.

If Enable Mark for Review is checked, the test-taker has the option of flagging items in the test (to be able to return to them later). Check Informational Item Usage if the item has been included in the test for informational purposes only. This prevents the item being treated as a question.

In the Navigation Warnings panel, check the boxes where you would like the test-taker to receive (or not receive) the warning in question.

In the Test-taker Tools panel, set the tools which should be made available to the test-taker for this section. See the chapter on Test-taker Tool Configuration for more information on the tools available.

The Selection panel asks if the delivered test section should include only some of the items assigned it (Enable selection), and if so, how many (Select). If With Replacement is checked while the selection mode is enabled, then questions may be repeated. Normally, they are only allowed to be used once in a Test sitting.

Ordering contains only one property setting, which is Shuffle. This setting randomizes the question order.

For Item Session Control and Time Limits, see the descriptions in the test-part properties above.

4. Click on the Item level properties icon.

This brings up seven panels: general properties, Test Navigation, Navigation Warnings, Test-taker Tools, Weights, Item Session Control, and Time Limits.

The last two panels are the same as the last two in both the test-part and section level properties. The three panels after the general properties (Test Navigation, Navigation Warnings and Test-taker Tools) are the same as in section level properties.

Note: In the Ignite/Premium Edition of TAO, the text-to-speech functionality (described above for section level properties) can be also configured at item level.

The general properties include entries for: Identifier, Reference, and Categories. It also includes check boxes to indicate if the item is Required and if it is Fixed.

Settings for Test Items
Settings for Test Items

The Identifier and References boxes generally do not require modification. Categories act as tag references which may be displayed to the test-taker. If the Required box is checked, the item will appear in the test, even if less than the total number of items appears in a given test (in a section where selection is enabled). If the Fixed box is checked, the item will appear in a particular order, even if the section ordering calls for shuffling. Categories are not displayed to the test-taker; typically they are used to calculate aggregate scores (e.g. on sub-domains). For more information, see the chapter on Scoring Tests.

For Test Navigation, Navigation Warnings and Test-taker Tools, see the description in the section level properties above.

In the Weights panel, the weight of that item can be adjusted. It is also possible to add further weights if you wish to enable the item to be scored in different ways for different tests. (The weight value to be used for a specific test should be selected in the Weight box in the Scoring panel in the test properties section above.)The default weight value for each item is 1. The chapter on Scoring Tests gives more information on weights.

For Item Session Control and Time Limits, see the descriptions in the test-part properties above.